The Maytag Washer drn error code can stop your washer mid-cycle, but it points to a specific, fixable fault rather than a mystery. This guide explains what drn means, the symptoms, the common causes, the safe steps you can try, and when to call an experienced technician. As an independent Maytag repair service — not affiliated with Maytag or Whirlpool Corp — we use genuine OEM parts and back every repair with a 30-day labor warranty.
What Maytag Washer drn means
drn means the washer started a cycle with water still in the tub and could not drain it within the expected time. Note: Maytag, Whirlpool, and KitchenAid share this control platform, so the code reads the same across them. On a Maytag washer, the control runs a self-check throughout a cycle; when a reading falls outside its expected range it stops and reports drn so the fault is not made worse. Clearing the code without addressing the cause usually just brings it back, so the goal is to find the part or condition behind it.
Symptoms that come with drn
Alongside the code on the display, you may notice:
- “drn” shown at the start of a cycle
- Water left in the drum
- Cycle will not advance past drain
Common causes of the drn code
The usual causes, from most to least common, are:
- A clogged drain-pump filter
- A kinked or blocked drain hose
- A clogged household standpipe
- A failed drain pump
Troubleshooting steps you can try
Before booking a visit, these safe checks resolve many drn faults. Always unplug the appliance or switch off its breaker before reaching inside.
- Clean the drain-pump filter behind the lower panel
- Check the drain hose for kinks
- Confirm the standpipe is clear
How serious is the drn code?
On a Maytag washer, drn is a moderate fault that is worth addressing promptly to avoid a stalled cycle. Some causes are owner-fixable while others need a technician. The affected components are typically the drain pump, pump filter, drain hose. Catching it early keeps a small fault from turning into a larger repair, and it protects the rest of the cycle. If you are unsure how far to take a repair on a washer, an experienced technician can confirm the cause before any part is bought.
Preventing the drn code
A little routine care keeps the maytag drn washer error from coming back. Keep filters, screens, and vents clear, do not overload the appliance, use the correct detergent or settings, and address small symptoms before they trip a code. Following the Maytag use-and-care guide for your model — and using genuine OEM parts when something does wear out — is the most reliable way to avoid repeat faults and keep your washer dependable for years.
When to call a technician
If the code returns after these checks, the fault is in a component that needs testing with a meter. Our experienced technicians diagnose the exact part, fit a genuine OEM replacement, and price the job from a diagnostic fee that depends on what failed — never a flat, sight-unseen number. Book Maytag washer repair, browse related faults on the washer error codes page, or look up your unit in the models directory. You can confirm details on the manufacturer site at maytag.com, then schedule an appointment for service in all 50 states.
